Sanyo PLC-XL50A Owner's Manual

Also see for PLC-XL50A: Code List Quick reference guide Dimensional drawing Manual Manual

Contents

Basic OperationAdjust the lens focus with the focus lever.Focus Lever•The arrows are white when there is no correction.•The direction of the arrow which are being correctedturns red.•The arrows disappear at the maximum correction.•If you press the KEYSTONE button on the top controlor on the remote control once more while thekeystone dialog box is being displayed, the keystoneadjustment is canceled.•The adjustable range can be limited depending on theinput signal.•The projected picture may fluctuate momentlydepending on the keystone adjustment.•“Keystone” disappears after 4 seconds.If a projected picture has keystone distortion, correct theimage with the Keystone function.Press the KEYSTONE button on the top control or on theremote control. The keystone dialog box appears. Correctkeystone distortion with the Point ed buttons. Keystoneadjustment can be stored (p.45).Reduce the upper widthwith the Point e button.Reduce the lower widthwith the Point d button.Keystone CorrectionRemote Control/CEILINGKEySTONE buttonPOINT ed buttonsFocus Adjustment24Top ControlKEySTONEbuttonPOINT ed buttonsZoom AdjustmentPress the ZOOM +/- buttons on the top control to adjust thescreen size. Screen size can be adjusted 84% to 100% fromits maximum screen size.It is not available when On-Screen menu is displayed.Zoom adjustment can be memorized. (p.45)Screen Position AdjustmentScreen position can be adjusted in the Zoom Adjustment.12Press the ZOOM+ or ZOOM- buttons on the topcontrol.While ZOOM+ or ZOOM- is displayed on the screen,press the SELECT button. Arrow marks displayed onthe screen.3 Press the point ed7 8 buttons to adjust screenpositions.Screen position can not be adjusted at ZOOM maximum.Top ControlZOOM +/- buttons