Sanyo PLC-XL50A Owner's Manual

Also see for PLC-XL50A: Code List Quick reference guide Dimensional drawing Manual Manual

Contents

Computer InputThe Auto PC Adjustmentfunction operates to adjustthe projector.PC System MenuThe PC System Menu iconThe selected system isdisplayed.Available system selection.Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the PC System Menu icon.Use the Point ed buttons to move the red arrowpointer to the desired system, and then press theSELECT button.12PC System MenuCustom Mode (1–5) set in thePC Adjust Menu (pp.30-31).PC system can also be selected manually.Computer System SelectionThe projector automatically tunes to various types of computers with its Multi-scan system and Auto PCAdjustment. If computer is selected as a signal source, the projector automatically detects the signal format andtunes to project proper images without any additional setting. (Signal formats provided in this projector is shownon page 67.)One of the following messages may appear when:The projector cannot recognize the connectedsignal conforming to the provided PC Systems.“Auto” is displayed on the PC System Menuicon and the Auto PC Adjustment function worksto display proper images. If images are notprojected properly, adjust manually. (pp.30-31)There is no signal input from computer. Checkthe connection between your computer and theprojector. (See “Troubleshooting” on page 60.)Auto-----The preset system is manually adjusted in thePC Adjust Menu. The adjusted data can bestored in Mode 1–5 (pp.30-31).Mode 1A PC System provided in the projector isselected. The projector selects a proper systemprovided in the projector and displays it.SVGA 1Selecting Computer System Manually*Mode 1 and SVGA 1 are examples.28