Sanyo PLC-XP41 Owner's Manual

Also see for PLC-XP41: Brochure & specs Specifications Service manual Service manual

Sanyo PLC-XP41 Owner's Manual Manual pdf 22 page image

22COMPUTER INPUTSELECTING INPUT SOURCEDIRECT OPERATIONChoose Computer by pressing INPUT button on Top Control or onRemote Control Unit.If projector cannot reproduce proper image, select correct input sourcethrough MENU OPERATION (see below).INPUT buttonINPUT 1INPUT 2INPUT 3Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button and a red-arrow icon will appear.Move arrow to "RGB", and then press SELECT button.13When connect a computer output [5 BNC Type (Green, Blue, Red,Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and Vjacks.WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )SELECTING COMPUTER SYSTEMWHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button to move a red arrow pointer to Input1 and then press SELECT button. Source Select Menu willappear.12Input 1INPUT MENUMove a pointer to either Digital or Analog and then pressSELECT button.3When your computer is connected to COMPUTERINPUT (DIGITAL) terminal, select RGB (Digital).DigitalWhen your computer is connected to COMPUTER INPUT(ANALOG) terminal, select RGB (Analog).AnalogMENU OPERATIONPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to select Input and press SELECTbutton. Another dialog box INPUT SELECT Menu will appear.Press POINT DOWN button and a red-arrow icon will appear.Move arrow to INPUT source that you want to select, and thenpress SELECT button.12Move a pointer to Digital orAnalog and press SELECTbutton.Move a pointer (red arrow) toInput 1 and press SELECTbutton.INPUT Menu iconSource Select MenuInput 2INPUT MENUMove a pointer to RGB andpress SELECT button.INPUT Menu iconMove a pointer (red arrow) toInput 2 and press SELECTbutton.Source Select MenuINPUT Menu iconPress POINT DOWN button to move a red arrow pointer to Input2 and then press SELECT button. Source Select Menu willappear.2