Sanyo PLC XP45L Owner's Manual

Also see for PLC-XP40/L: Comparison chart Specifications

Sanyo PLC XP45L Owner's Manual Manual pdf 37 page image

37SETTING/APPENDIXOPERATING WIRELESS MOUSEINSTALLATIONWireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for mostPersonal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON-SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mousefunction cannot be used.Connect mouse port (or USB port) of your computer to ControlPort (or USB connector) of this projector with Control Cable (orUSB cable). (Refer to page 11, 12 for connection.)Turn a projector on first, and then turn on your computer. Whencomputer is switched on first, Wireless Mouse may not workproperly.12To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of mouse driver (not supplied)is required. Make sure that mouse driver is properly installed in your computer. And make sure that mouse port (or USBport) of a Personal Computer is activated.OPERATING WIRELESS MOUSEWhen controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICKbutton on Wireless Remote Control Unit.Used to move PC mouse pointer. Pointer is moved correspondingwith direction you are pressing.POINT buttonThis button has same function as left button in a PC mouse.SELECT (LEFT CLICK) buttonThis button has same function as right button in a PC mouse. Thisbutton is not available for controlling this projector.RIGHT CLICK buttonNote : When your computer has no mouseport, connect Serial Port of yourcomputer to Control Port of a projectorwith Control Cable for Serial Port (notsupplied).POINT button (Move pointer)SELECT button(left button of mouse)RIGHT CLICK button(right button of mouse)USBProjector modeSelect " " when controlling a projector with computer.NOTE: Before you control a projector by computer, install USB driver(optionally sold parts) and set up computer following instruc-tion in USB driver package. Contact your authorized dealer.This Projector is equipped with USB port for interactive operationbetween a projector and computer. Set mode following steps below.Wireless Mouse modeSelect " " when controlling a computer with Remote Control ofthis projector.Closes SETTING MENU.QuitMove pointer to item and then pressPOINT LEFT/RIGHT button(s).Press SELECT button at this icon todisplay previous items.USB