S–VIDEOR–AUDIO–LVIDEO/Y Cb/Pb Cr/PrVIDEO/Y Cb/Pb Cr/PrRESET CONTROL PORTUSBAUDIO 1 AUDIO 2ANALOG DIGITAL(DVI-D)INPUT 1INPUT 2INPUT 3R/C JACKG B R H/V V(MONO)11CONNECTING PROJECTORTERMINALS OF PROJECTORWhen controlling computerwith Remote Control Unit ofthis projector, connect mouseport of your personal computerto this connector. (Refer toP12.)Connect S-VIDEOoutput from videoequipment to thisjack. (Refer to P13.)Connect an audio output(stereo) from computer tothese jacks.(Refer to P12.)Connect an audio outputfrom video equipment tothese jacks.(Refer to P13.)CONTROL PORT CONNECTORCOMPUTER AUDIOINPUT (1 and 2) JACKSAUDIO INPUT JACKSVIDEO INPUT JACKS S-VIDEO INPUT JACKConnect composite videooutput from video equipmentto VIDEO/Y jack or connectcomponent video outputs toVIDEO/Y, Cb/Pb and Cr/Prjacks. (Refer to P13.)Connect computer (digital/analog)output to one of these terminals.(Refer to P12.)COMPUTER INPUTTERMINALS (DIGITAL/ANALOG)This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures onpages 11 to 13 and connect properly.This projector uses a micro processorto control this unit, and occasionally,this micro processor may malfunctionand need to be reset. This can bedone by pressing RESET button with apen, which will shut down and restartunit. Do not use RESET functionexcessively.RESET BUTTONWhen controlling computer withRemote Control Unit of thisprojector, connect mouse portof your personal computer tothis terminal. (Refer to P12.)USB CONNECTOR (Series B)✽ Do not press this button. This buttonis used for our optional accessories.Connect component videooutput (Y, Cb, Cr or Y, Pb, Pr)from video equipment toVIDEO/Y, Cb/Pb and Cr/Prjacks or connect computeroutput {5 BNC Type (Green,Blue, Red, Horiz. Sync andVert. Sync.)} from computerto G, B, R, H/V and V jacks.(Refer to P12 and 13.)5 BNC INPUT JACKSWhen using Wired/WirelessRemote Control Unit as WiredRemote Control, ConnectWired Remote Control Unit tothis jack with Remote ControlCable (supplied).R/C JACK