Sanyo PLC-XP46 Service Manual
Also see for PLC-XP41: Brochure & specsOwner's manualSpecificationsService manual
                                                                                                                          | |
Contents
| 
-13-1 Remove Cabinet Front-Top following to the chapter “MechanicalDisassemblies”.2 Loosen 2 screws A with 2.5mm hex wrench.3 Unhook 2 hooks B on the both side of the lens and remove theProjection Lens ass’y off.Fig.1■ Optical Parts DisassembliesBefore taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”.Disassembly requires a 2.0mm or 2.5mm hex wrench and a slot screwdriver.Projection Lens removalFig.1- 21 Remove each hex screw and pull the Polarized Glass-In ass’y upward.2 Remove a stopper and take the glass off upward.Polarized Glass-In removalFig.2- 1Fig.2- 2AABBStopperpolarized glass* Glass should be placed as theprinted marker comes to theupper left corner.Phase SheetPart No. is printed onupper side. |
Related manuals for Sanyo PLC-XP41
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine