Sanyo PLC-XTC50AL Service Manual

Also see for PLC-XTC50AL: Owner's manual Specifications Specifications

Contents

-8-Chassis DescriptionIndicators and Projector ConditionCheck the indicators for the projector condition.The projector is operating normally.• • • on• • • off• • • blinking at the normal rate(approx. 1 second ON,1 second OFF)• • • blinking slow(approx. 2 seconds ON,2 seconds OFF)• • • blinking fast(approx. 0.5 seconds ON,0.5 seconds OFF)IndicatorsProjector conditionPOWERgreen / redWARNINGTEMP.redWARNINGFILTERorangeSHUTTERblueLAMP 1/2REP.yellowThe projector is off. (The AC power cord is unplugged.)The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.The projector is operating normally.(The Shutter is open)The projector is operating normally.(The Shutter is closed)The projector is preparing for stand-by or the projec-tion lamp is being cooled down. The projector cannotbe turned on until cooling is completed and the POWERindicator lights red.The projection lamp is being cooled down in the Powermanagement mode.The projector is in the Power management mode.The projection lamp is being cooled down in the Shuttermanagement mode.The projector is in the Shutter management mode. Pressthe ON/STAND-BY button to turn on the projector.The filter is scrolled using the Filter control function in thesetting menu. When the filter is being scrolled, the Filterreplacement icon and “Please wait...” message (Fig. 1)appear on the screen.✽✽✽✽Fig.1 Filter replacement icon and “Please wait...”✽✽✽✽✽ ✽✽✽✽✽✽✽✽✽✽✽✽ • • • Differs according to conditions.✽✽✽✽✽✽ ✽redgreengreenredredgreenredgreen✽✽✽