-1-Optical Parts Disassembly52752859Fig.81610When mounting or assembling the optical parts in the opti-cal unit, the parts must be mounted in the specified loca-tion and direction as shown in figure below.2348 811, Locations and DirectionsRugged surface isfacing this side.Point marker is printedon this side upPoint marker is printedon this side upNo. Parts Name1 Integrator lens (OUT) Prism beam splitter (PBS)3 Condenser lens (OUT)4 Dichroic mirror (B)5 Dichroic mirror (G)6 Condenser lens (G)7 Relay Lens (IN)8 Mirror (R)9 Condenser lens (R)10 Condenser lens (B)11 Mirror (B)7Film attached side isfacing this side.
