Sanyo PLC-XU21N Owner's Manual

10CONNECTING THE PROJECTORTERMINALS OF THE PROJECTORS-VIDEOR-AUDIO-L(MONO) VIDEO AUDIOINOUTCONTROL PORTCOMPUTER INMONITOR OUTConnect the computer output tothis terminal.(Refer to P12, 13.)When controlling the computerwith the Remote Control of thisprojector, connect the mouseport of your personal computerto this terminal.(Refer to P12, 13.)Connect the audio amplifier tothis terminal.(Refer to P11, 12, 13.)Connect the S-VIDEO outputfrom the video equipment to thisterminal.(Refer to P11.)Connect the audio output fromthe computer to this terminal.(Refer to P12, 13.)Connect the audio outputs fromthe video equipment to theseterminals.(Refer to P11.) When the audio output ismonaural, connect it to the Leftjack.COMPUTER INPUT TERMINALMONITOR OUTPUT TERMINALCONTROL PORT CONNECTORCOMPUTER AUDIO INPUT JACKAUDIO INPUT JACKSVIDEO INPUT JACKS-VIDEO INPUT JACKAUDIO OUTPUT JACK (STEREO)Connect the video output fromthe video equipment to thisterminal.(Refer to P11.)COMPUTER INPUT / MONITOR OUTPUT TERMINALTerminal : HDB15-PINConnect the display output terminal of the computer to COMPUTER INPUT terminal of thus projector with the VGA Cable(supplied). And connect to the monitor to MONITOR OUTPUT with the monitor cable (not supplied). When connectingthe Macintosh computer, the MAC Adapter (not supplied) is required.