Sanyo PLC-XU21N Owner's Manual

27COMPUTER MODEThe Auto Image function is provided to automatically adjust Finesync., Total dots, and Picture Position for most computers.Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectAUTO IMAGE and press the SELECT button.Another dialog box AUTO IMAGE Menu will appear.Move the arrow to an item that you want to adjust by pressingthe POINT UP/DOWN button. Change the setting On or Off bypressing the SELECT button.12AUTO IMAGE FUNCTIONMove the arrow to “Go!” and press the SELECT button to startthe Auto Image function.This adjustment can be executed by pressing AUTO IMAGEbutton on the Top Control and the Remote Control Unit.3NOTE : The Fine sync., Total dots, and Picture Position of somecomputers may not be fully adjusted with the Auto ImageFunction. In that case, manual adjustment is required tomake fine image. (Refer to page 26 to adjust "Fine sync." or"Total dots" and page 27 to adjust Picture Position.)It terminates the PICTUREIMAGE ADJUSTMENT Menu.Move the arrow tothe item and thenpress the SELECTbutton.It starts the adjustmenton the item set to "On".Adjust the picture as necessary to eliminate flicker from the display.This item can be adjusted manually. (Refer to page 26.)The number of the total dots in one horizontal period. This item canbe adjusted manually. (Refer to page 26.)Adjustment of the position of the image. This item can be adjustedmanually. (Refer to page 27.)Fine sync.Total dotsPositionStores the On/Off setting of each item.StoredStarts the Auto Image Adjustment.Go!Closes the AUTO IMAGE ADJUSTMENT Menu.QuitPICTURE POSITION ADJUSTMENTThe position of the image can be adjusted vertically and horizontally through PICTURE POSITIONADJUSTMENT.Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectPOSITION and press the SELECT button. The PICTUREPOSITION dialog box will appear.Move the image by pressing the POINT UP / DOWN / RIGHT /LEFT buttons.12 PICTURE POSITIONdialog boxPress the POINT UP /DOWN / RIGHT / LEFTbuttons to move the imageTo cancel POSITION mode, press the any buttons except SELECT,RIGHT CLICK, POINT or LASER button. To recall the positionpreviously adjusted, press NORMAL button.