Sanyo PLC-XU305A - 3000 Manual

Also see for PLC-XU305A: Specification sheet Brochure & specs Specifications Command list Owner's manual

Contents

PLC-XU305A/355A Expand Serial Command Functional Specifications24/688.6 Input Control Command8.6.1 CF_INPUT CommandCommand “CF_INPUT_%1”[CR]%1“CONPUTER1” ----- Select Computer1 Input“COMPUTER2” ----- Select Computer2 Input“VIDEO” --------------- Select Video Input“S-VIDEO” ------------ Select S-video“NETWORK” -------- Select Network“UP” ------------------- Switch Input setting forwardComputer1 → Computer2 → Video →S-video→ Network → …“DN” -------------------Switch Input setting backwardNetwork → S-video → Video → Computer2 →Computer1→….DetailsSelect InputThe same operation as “INPUT” button of the projector and Remote Control.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1”[CR]%1Input isComputer 1“ANALOG” --------- Select Analog Input“YPBPR” ----------- Select Component Input“SCART” ----------- Select Scart Input”UP” ---------------- Switch Input as followsAnalog →YPBPR →Scart →…”DN” ---------------- Switch Input as followsScart →YPBPR →Analog →…Input isComputer 2“DIGITAL” ---------- Select DVI Input“HDCP” ------------ Select DVI HDCP Input“ANALOG” --------- Select Analog Input”UP” ---------------- Switch Input as followsDIGITAL → HDCP →ANALOG → DIGITAL ...”DN” ---------------- Switch Input as followsANALOG → HDCP → DIGITAL →ANALOG → ...Input is Video“VIDEO” ------------- Select Composite Video Input”UP””DN”Although there is no option of source, projector acceptsparameter ”UP” ”DN”Input isS-video“S VIDEO” -------- Select S-Video Input”UP””DN”Although there is no option of source, projector acceptsparameter ”UP” ”DN”Input isWirelessNetwork ------------- Select Network”UP””DN”Although there is no option of source, projector acceptsparameter ”UP” ”DN”DetailsSelect Source of currently selected InputWhen Input specified by %1 is inappropriate for selected Input, the projectorreturns “101” and the command is not executed.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]