Sanyo PLC-XU31 Owner's Manual

Also see for PLC-XU31: Service manual Comparison chart Comparison chart Comparison chart Comparison chart

Sanyo PLC-XU31 Owner's Manual Manual pdf 11 page image

CONTROL PORTUSBRESETY – Pb / Cb – Pr / CrR – AUDIO IN – L (MONO)S – VIDEOCOMPUTER INMONITOR OUTEXT.SP(8Ω)(STEREO)AUDIO INCOMPUTERVIDEO11CONNECTING PROJECTORTERMINALS OF PROJECTORWhen controlling the computerwith Remote Control Unit ofthis projector, connect themouse port of your personalcomputer to this connector.(Refer to P12.)Connect the S-VIDEOoutput from videoequipment to thisjack. (Refer to P13.)Connect the audio output(stereo) from computer tothis jack. (Refer to P12.)Connect the audio outputfrom video equipment tothese jacks.(Refer to P13.) When the audio outputis monaural, connect itto L (MONO) jack.CONTROL PORT CONNECTORCOMPUTER AUDIOINPUT JACKAUDIO INPUT JACKS VIDEO INPUT JACKS S-VIDEO INPUT JACKConnect the composite videooutput from video equipmentto VIDEO/Y jack or connectthe component video outputsto VIDEO/Y, Pb/Cb andPr/Cr jacks. (Refer to P13.)Connect a computer outputto this terminal.(Refer to P12.)COMPUTER INPUTTERMINALThis projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures onpages 11 to 13 and connect properly.Connect an externalspeaker system to this jack.(Refer to P12, 13)EXTERNAL SPEAKER JACKThis projector uses a microprocessor to control this unit,and occasionally, this microprocessor may malfunctionand need to be reset. Thiscan be done by pressingRESET button with a pen,which will shut down andrestart the unit. Do not useRESET function excessively.RESET BUTTONWhen controlling the computerwith Remote Control Unit ofthis projector, connect USBport of your personal computerto this connector. (Refer toP12.)USB CONNECTOR (Series B)Connect a monitor to thisterminal. This terminaloutputs a computer inputsignal. (Refer to P12.)MONITOR OUTPUTTERMINAL