Sanyo PLC-XU31 Owner's Manual

Also see for PLC-XU31: Service manual Comparison chart Comparison chart Comparison chart Comparison chart

Sanyo PLC-XU31 Owner's Manual Manual pdf 21 page image

21BASIC OPERATIONPress NO SHOW button on Remote Control Unit to black out theimage. To restore to normal, press NO SHOW button again or pressany other button.NO SHOW FUNCTIONMessage disappears after 4 seconds.No showPress P-TIMER button on Remote Control unit. The timer display “00: 00” appears on the screen and the timer starts to count time (00 : 00~ 59 : 59).To stop P-TIMER display, press P-TIMER button. And then, press P-TIMER button again to cancel P-TIMER function.P-TIMER FUNCTION12Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toSOUND Menu icon.VolumePress VOLUME (+/–) button(s) on Top Control or on Remote ControlUnit to adjust volume. Volume dialog box appears on the screen for afew seconds.(+) button to increase volume, and (–) button for decreasing.MutePress MUTE button on Remote Control Unit to cut off sound. Torestore sound to its previous level, press MUTE button again or pressVolume (+/–) button(s).To increase volume, press POINT RIGHT button, and press POINTLEFT button for decreasing.Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog boxdisplay is changed to “On” and sound is cut off. To restore sound toits previous level, press POINT LEFT/RIGHT button(s) again.Press POINT DOWN button to move a red frame pointer to theitem that you want to select, and then press SELECT button.Indicates roughlylevel of volume.Close SOUND Menu.SOUND ADJUSTMENTDIRECT OPERATIONMENU OPERATIONVolumeMuteIndicates roughly level ofvolume.Press MUTE button to setMute function On or Off.The display disappears after 4 seconds.SOUND MENUSOUND Menu icon