Sanyo PLV-60 Owner's Manual

Also see for PLV-60: Service manual

18LENS SHIFT KEYSTONESELECTNORMALMENUBEFORE OPERATIONHOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENU OPERATIONDisplay ON-SCREEN MENUPress MENU button to display ON-SCREEN MENU(MENU BAR). A red frame is POINTER.Move POINTER (red frame) to MENU ICON that youwant to select by pressing POINT RIGHT / LEFTbuttons.Adjust ITEM DATA by pressing POINT buttons.Refer to the following pages for details of respectiveadjustments.Press POINT DOWN button and move POINTER (redframe or red arrow) to ITEM that you want to adjust, andthen press SELECT button to show Item Data.Select item to be adjustedControl and adjust through ON-SCREEN MENU1243You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operateeach adjustment on ON-SCREEN MENU.2 MOVING POINTER3 SELECT ITEMMove the pointer (✽ see below) or adjust the value of item bypressing POINT button(s) on Top Control or on RemoteControl Unit.Select the item by pressing SELECT button.Used to select the item.SELECT BUTTONUsed to move thePointer UP/ DOWN/RIGHT/ LEFT.POINT BUTTONSREMOTE CONTROLOPERATING ON-SCREEN MENU✽ Pointer is the icon on ON-SCREEN MENU to select theitem. See the figures on the section "FLOW OF ON-SCREEN MENU OPERATION" below.INPUTMENUSELECTNORMALAUTO PC ADJ.L Used to select the item.SELECT BUTTONUsed to move thePointer UP/ DOWN/RIGHT/ LEFT.POINT BUTTONSTOP CONTROLMENU BARPOINTER(red frame)MENU ICONITEM DATAPress POINT LEFT/RIGHTbuttons to adjust the value.SELECTBUTTONPOINTER (red frame)Press POINT DOWN button tomove POINTER.1 DISPLAY MENUPress MENU button to display ON-SCREEN MENU.ITEM