Sanyo PLV-60 Owner's Manual

Also see for PLV-60: Service manual

PC ADJUSTMENTAUTO PC ADJUSTMENTAuto PC Adjustment function is provided to automatically adjust Fine sync., Total dots, and Picture Position to conform toyour computer. Auto PC Adjustment function can be operated as follows.NOTE : Auto PC Adjustment function cannot be operated when“RGB,” “HDTV720p,” “HDTV1035i” or “HDTV1080i” isselected on SYSTEM Menu (P23, 24).Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer to PCADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer toAUTO PC Adj. icon and then press SELECT button.This Auto PC Adjustment can be executed by pressing AUTOPC ADJ. button on Top Control or on Remote Control Unit. Move a red frame pointer to AUTO PCAdj. icon and press SELECT button.PC ADJUST MENUFine sync, Total dots and Picture Position of some computersmay not be fully adjusted with Auto PC Adjustment function.When the image is not provided properly through this function,manual adjustment is required. (Refer to page 25, 26.)Auto PC Adj.PC ADJUSTMenu icon24COMPUTER MODESELECT COMPUTER SYSTEM MANUALLYSYSTEM Menu iconDisplays system being selected.The systems on this dialog boxcan be selected.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toSYSTEM icon.Press POINT DOWN button to move a red arrow pointer to thesystem that you want to set, and then press SELECT button.12When this mark is displayed asblack, more computer systemmodes will be available. Movethe arrow to this mark and thenpress SELECT button, and theother modes will be displayed.SYSTEM MENUCustom Mode (1~5) set in PCADJUST Menu. (P25, 26)This projector automatically selects PC system among those providedin this projector and PC system can be also selected manually.Store adjustment parameters.Adjustment parameters from Auto PC Adjustment can be memorizedin this projector. Once parameters are memorized, setting can bedone just by selecting Mode in SYSTEM Menu (above). Refer to step3 of MANUAL PC ADJUSTMENT section (P26).