Sanyo PLV-70 Owner's Manual

20BASIC OPERATIONADJUSTING SCREENMessage disappears after 4 seconds.Message disappears after 4 seconds.ZoomFocusZOOM ADJUSTMENTFOCUS ADJUSTMENT1 Press ZOOM button on Top Control or ZOOM / button onRemote Control Unit. Message “Zoom” is displayed.2 Press ZOOM button or POINT UP button to make imagelarger, and press ZOOM button or POINT DOWN button tomake image smaller.1 Press FOCUS button on Top Control or FOCUS / button onRemote Control Unit. Message “Focus” is displayed.2 Adjust focus of image by pressing FOCUS / button orPOINT UP/DOWN button(s) .Lens shiftLENS SHIFT ADJUSTMENT1 Press LENS SHIFT button on Top Control or on Remote ControlUnit. Message “Lens shift” is displayed.2 Press POINT UP button to move image up, press POINT DOWNbutton to move image down.KEYSTONE ADJUSTMENT1 Press KEYSTONE button on Remote Control Unit or selectKeystone on SETTING menu. (Refer to page 37.) Keystonedialog box appears.2 Correct keystone distortion by pressing POINTUP/DOWN/LEFT/RIGHT button(s). Press POINT UP button toreduce the upper part of the image, and press POINT DOWNbutton to reduce the lower part. Press POINT LEFT button toreduce the left part, and press POINT RIGHT button to reducethe right part.Reduce the upper widthwith POINT UP button.Reduce the lower widthwith POINT DOWN button.If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.Reduce the left part withPOINT LEFT button.Reduce the right part withPOINT RIGHT button.• Arrows are white in no correction.• Arrow(s) of direction being corrected turn(s) red.• Arrow(s) disappear(s) at the maximumcorrection.• If you press the KEYSTONE button on theremote control unit once more while thekeystone dialog box is being displayed, thekeystone adjustment will be canceled.NOTE;Focus adjustment may not function properly if the image iscorrected by KEYSTONE adjustment.