36VIDEO INPUTPICTURE SCREEN ADJUSTMENTThis projector has a picture screen resize function, which enables you to display desirable image size.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toSCREEN Menu icon.Press POINT DOWN button and move a red frame pointer tofunction that you want to select and then press SELECT button.12NOTE : SCREEN Menu cannot be operated when“720p,” “1035i,” or “1080i” is selected on AVSYSTEM Menu (P32).PICTURE SCREEN SELECT (DIRECT)Select picture screen among Full, Zoom, Normal and Wide zoom bypressing SCREEN button on Remote Control Unit.SCREEN buttonFullZoomNormalWide zoomPICTURE SCREEN SELECT (MENU)Provides image to fit width of screen by expanding image widthuniformly. This function can be used for providing a squeezed videosignal at wide video aspect ratio of 16 : 9.When your video equipment (such as DVD) has 16 : 9 output mode,select 16 : 9 and select Full on this SCREEN Menu to provide betterquality.Full Move the red frame to the function andpress SELECT button.SCREEN MENUSCREEN Menu iconProvides image to fit screen size (16 : 9 aspect ratio) by expandingimage width and height uniformly. This function can be used forproviding a letter box mode picture (4 : 3 aspect picture with blackbar on top and bottom edges) at wide video aspect of 16 : 9.ZoomProvides image at the normal video aspect ratio of 4 : 3.NormalProvides image to fit width of screen by expanding both sides ofimage. This function is suitable to provide a normal video signal (4 :3 aspect ratio) at wide video aspect ratio of 16 : 9.Wide zoomTo store adjustment data, move a red frame pointer to Store icon andpress SELECT button. Image Level Menu will appear. Move a redframe pointer to Image Level 1 to 4 and then press SELECT button.Reset all adjustment to previous figure.ResetStoreCloses IMAGE MENU.QuitOther icons operates as follows.MidImage Level MenuMove a red frame pointer toimage icon to be set and thenpress SELECT button.Store icon323232158OnOn