Sanyo PLV-WF10 Owner's Manual

Also see for WF10 - PLV WXGA LCD Projector: Specifications Service manual

Contents

38VIDEO INPUTPICTURE SCREEN ADJUSTMENTThis projector has a picture screen resize function, which enables you to display desirable image size.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toSCREEN Menu icon.Press POINT DOWN button and move a red frame pointer tofunction that you want to select and then press SELECT button.12NOTE : SCREEN Menu can not be operated when“720p”, “1035i”, “1080i50” or “1080i60” isselected on AV SYSTEM Menu (P35).Move a red frame to function and pressSELECT button.SCREEN MENUSCREEN Menu icon3 To store adjustment data, move a red frame pointer to Store iconand press SELECT button. Image Level Menu will appear.Move a red frame pointer to Image Level 1 to 4 and then pressSELECT button.Image Level MenuMove a red frame pointer toimage icon to be set andthen press SELECT button.Store iconReset all adjustment to previous figure.ResetStoreCloses IMAGE MENU.QuitOther icons operates as follows.Provides image to fit width of screen by expanding image widthuniformly. This function can be used for providing a squeezed videosignal at wide video aspect ratio of 16 : 9.When your video equipment (such as DVD) has 16 : 9 output mode,select 16 : 9 and select Full on this SCREEN Menu to provide betterquality.FullProvides image to fit screen size (16 : 9 aspect ratio) by expandingimage width and height uniformly. This function can be used forproviding a letter box mode picture (4 : 3 aspect picture with blackbar on top and bottom edges) at wide video aspect of 16 : 9.ZoomProvides image at the normal video aspect ratio of 4 : 3.NormalProvides image to fit width of screen by expanding both sides ofimage. This function is suitable to provide a normal video signal (4 :3 aspect ratio) at wide video aspect ratio of 16 : 9.Natural wide