Sanyo PLV-WF10 Owner's Manual

Also see for WF10 - PLV WXGA LCD Projector: Specifications Service manual

Contents

42SETTINGLamp counter resetMove pointer to Lamp counter resetand then press SELECT button.Move arrow to replaced lampnumber (Lamp 1 or Lamp 2) andthen press SELECT button.Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMPREPLACE indicator stops lighting.Turn projector on, press MENU button and ON-SCREENMENU will appear. Press POINT LEFT/RIGHT button(s) tomove a red frame pointer to SETTING Menu icon.1Press POINT DOWN button to move a red frame pointer to“Lamp counter reset” and then press SELECT button.2Do not reset Lamp Replace Counter except after Projection lamp isreplaced.Another confirmation dialog box appears and select [Yes] toreset Lamp Replace Counter.4Move arrow to replaced lamp number (Lamp 1 or Lamp 2) andthen press SELECT button. Message "Lamp replace counterReset?" is displayed. Move pointer to [Yes] and then pressSELECT button.3NOTE: Be sure to reset correct lamp number otherwise LAMPREPLACE indicator continues lighting.Closes SETTING MENU.QuitFactory defaultPress POINT UP/DOWN button to move a red frame pointer to“Factory default” and then press SELECT button. The message"Return to Factory default?" is displayed. Move the pointer to [Yes]and then press SELECT button.Another confirmation dialog box appears and select [Yes] and thenpress SELECT button. Return the projector to Factory default.This function returns all setting values except for the lamp counter tothe factory default settings.Factory defaultMessage "Lamp replace counter Reset?" isdisplayed. Move pointer to [Yes] and thenpress SELECT button.1 21 2