Sanyo PLV-Z4000 Service Manual

Also see for PLV-Z4000: Owner's manual Specifications Specifications Quick reference guide

Contents

- 47 -◆ to enter service modeTo enter service mode, press and hold the "MeNu" and"INPut" buttons on the projector simultaneously for 5 seconds.(Or press and hold the "MeNu" button on the remote controlunit for 20 seconds.) The "S" mark appears on the screen. Whilethe "S" mark is displayed on the screen, press and hold the "PoINt uP" and "PoINt doWN" buttons on the projector or"ScreeN" button on the remote control unit for more than 3seconds. As shown in a figure, a service mode display appearson a screen.◆ to adjust service dataAdjust service data using the following control buttons.– "oK" ..........................................A group number increases.– "MeNu" ..................................A group number decreases.– "PoINt uP" ..........................An item number increases.– "PoINt doWN" .................An item number decreases.– "PoINt rIGHt" ..................An adjustment value increases.– "PoINt LeFt" ......................An adjustment value decreases.◆ to exit service modeTo quit the service mode, press the "PoWer oN/StANd-BY"button only once on the projector or the remote control unit .Service Adjustment Menu operationRemote ControlTop ControlElectrical AdjustmentNormal Mode "S" mark displayMENUService ModeInput VIDEOImage NaturalGroup No. DataSANYO0 +1R 1.00 ME4A102Ver.Service ModeService mode+DOWNPOWERON/STAND-BYINPUTUP+S