Sanyo PLV-Z700 Service Manual

Also see for PLV-Z700: Brochure Owner's manual

Contents

- 83 -IndicatorsProjector ConditionPOWERred/green/orangeWARNINGredLAMPREPLACEyellowThe Main On/Off switch is off or the AC power cord is unplugged.Q The projection lamp is being cooled down. The projector cannot be turned onuntil cooling is completed.Q The projector is ready to be turned on with the POWER ON/STAND-BY button.Q The projector is operating normally.Q The projector is in the Power management mode.QThe temperature inside the projector is abnormally high. The projector cannotbe turned on. When the projector is cooled down enough and the tempera-ture returns to normal, the POWER indicator emits red light and the projectorcan be turned on. (The WARNING indicator keeps blinking.) Check and cleanthe air filters.Q The projector has been cooled down enough and the temperature returns tonormal. When turning on the projector, the WARNING indicator stops blinking.Check and clean the air filters.QThe projector detects an abnormal condition and cannot be turned on.Unplug the AC power cord and plug it again to turn on the projector. If theprojector is turned off again, unplug the AC power cord and checkup.Check the power lines. (Power failure)The lamp does not turn on because malfunction occurs or the lamp reachesits end of life.Q The automatic slide shutter is not working property.Check the indicators for projector condition.• • • green • • • red • • • off• • • blinking greenQ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indica-tor lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter afterreplacement of the lamp.Indicators and Projector Condition• • • blinking redTroubleshooting• • • blinking orange• • • blinking yellow