Sanyo VA-80LAN Instruction Manual

Also see for VA-80LAN: Installation manual

Sanyo VA-80LAN Instruction Manual Manual pdf 14 page image

English 13NETWORK SETTINGS (“admin” only)1 TITLESpecifies the camera title.The title specified here appears in the main screenand is inserted into the alarm notification e-mail.The title can be up to 16 alphanumeric characters.2 IP ADDRESSSelect the method for configuring the camera IPaddress.3 SUBNET MASKWhen the [IP ADDRESS] setting is “FIX”, enter thesubnet mask.4 GATEWAYWhen the [IP ADDRESS] setting is “FIX”, enter thegateway.5 MAC ADDRESSThe MAC address of the camera is displayedautomatically.6 DNSWhen the [IP ADDRESS] setting is “DHCP”, selectthe method for configuring the DNS server address.7 DNS SERVER ADDRESSWhen the [DNS] setting is “FIX”, enter the DNSserver address.8 SSLSelect “ON” when you want to use the SSLencryption for the video signal.9 PORT NUMBERThe default value depends on the preferencesspecified in the [SSL] setting above.You can assign a value between 1 and 65535 to theSSL port number.Note:Set the port number in the range of “1 – 65535” butmake sure that it doesn’t overlap with the [AUDIOPORT NUMBER] on the [AUDIO SETTINGS]screen.F PASSWORDSpecify the login password according to each username (guest/admin).MEMO:When you enter a blank “guest” password (nopassword is specified), the authentication processfor accessing the camera will be omitted.G NETWORK SPEEDSelect the data transfer speed in consideration ofthe network environment.H [SET] buttonAfter completing the settings, click this button toconfirm the settings.To reflect the settings, use the Close button toterminate the camera connection, and then accessthe camera again.123456789FGHFIX Manually configure the IP address.→ Enter the IP address.DHCP Automatically allocates the IP address.FIXManually configure the DNS serveraddress.→ Enter the DNS server address.DHCP Automatically allocates the DNS serveraddress.SSL (OFF) 80SSL (ON) 443