Sanyo VCC-MD300 Technical Manual

Sanyo VCC-MD300 Technical Manual Manual pdf 32 page image

− 31 −[8] ApertureEmphasizes contours and increases the vividness ofthe entire image.[9] Motion DetectionThe screen is divided into 48 areas (8 x 6) andmovement is detected from changes in brightness ofrepresentative points within each area.The detection status can be confirmed by enquiringusing the Status command.In addition, the detection sensitivity can be adjustedby configuring the following items.Sensitivity (MOVE)⁃Sensitivity when determining movement can beconfigured to a range of 1 to 10. 1 is the mostsensitive to movement.Brightness Level (Y-LEVEL)⁃Settings for minimum brightness level whendetermining movement (Valid for brightness abovethe configured level)The configuration range is 1 to 10. 1 is the mostsensitive to the minimum brightness level.Brightness Difference (Y-Differ)⁃Settings for differences in brightness of the 2images when determining movement (Invalid whenexceeding configured brightness differences)The configuration range is 1 to 10. 1 is the mostsensitive to the difference in maximum brightness.Time Interval (Duration)⁃Time interval settings when determining movementThe configuration range is 1 to 60. 1 is the mostsensitive to minimum time intervals.Time intervals are divided into 5 fields.⁃Movement Assessment Confirmation Mode (TEST)[10] Day/Night Switch ControlAUTO⁃Automatically switches the camera from colorimages to black and white images depending onthe brightness of the day and night. The illuminationlevel at which the camera changes from colorimages to black and white images can be set to3 levels (MID, HIGH, LOW) or to manual (ADJ)setting.COLOR⁃Fixes the camera to color images.B/W⁃Fixes the camera to black and white images.Function Descriptions