Sanyo VCC-ZMN600P Installation Manual

Also see for VCC-ZMN600P: Brochure

Contents

Sanyo VCC-ZMN600P Installation Manual Manual pdf 10 page image

9FeaturesZooming Functionb You can store the zoom and focussettings of surveillance locations bycamera setting number.& [CAMERA] ⇒ [POSITION]b The electronic zooming function can beused to zoom in the object at themagnification power higher than that inthe optical zoom.& [LENS] ⇒ [ZOOM] ⇒ [EL ZOOM]b You can change the zooming speed.& [LENS] ⇒ [ZOOM] ⇒ [SPEED]yPOSITIONPOSITIONPOSITIONSETx 3.0x 3.0x 3.0yPOSITIONPOSITIONPOSITIONSETx 1.0CAMERA 1 CAMERA 2Alarm Settingsb The camera has a built-in motion sensor.& [CAMERA] ⇒ [MOTION] ⇒ [ON]b The alarm condition can be detected byconnecting door switches or infraredsensors.& [ALARM] ⇒ [ALARM IN]Not detected DetectedRemote Operationsb The camera can be controlled remotelyby establishing the networkcommunication.& [OPTION] ⇒ [NETWORK]b You can switch the viewing modemanually between the color mode andthe black/white mode.& [CAMERA] ⇒ [COLOR] ⇒[EXT ALARM]Camera TitleYou can set and display the camera title.This helps you confirm from which camerathe image is sent when multiple camerasare connected. (Maximum 16 characters)& [OPTION] ⇒ [DISPLAY] ⇒ [TITLE]ROOM1 ROOM2ROOM1 ROOM2Alarm Noticeb The camera title you specified in the[OPTION] menu blinks to notify that thealarm condition is detected.& [ALARM] ⇒ [ALARM DISPLAY]b When the alarm condition is detected,the object on the screen is zoomed in.& [ALARM] ⇒ [ALARM IN] ⇒[ACTION] ⇒ [ZOOM]b A buzzer or lamp can be used to notifyyou of detection of alarm when you are ina distant place from the monitor.& [ALARM] ⇒ [ALARM OUT]DOOR1DOOR1DOOR1& You can perform the settings on the camera bynavigating through the menu screens.