Sanyo VCC-ZMN600P Installation Manual

Also see for VCC-ZMN600P: Brochure

Contents

Sanyo VCC-ZMN600P Installation Manual Manual pdf 6 page image

5Connections■ Connection when Using PoE (Power over Ethernet) Power SupplyThis camera provides simultaneous delivery of video in the JPEG and H.264 formats and alsobi-directional video between the camera and PC.● System RequirementsThe system requirements for camera operation via network are as follows:• PC: IBM PC/AT and compatibles• OS: Windows XP Home Edition/Windows XP Professional• CPU: Pentium IV (2.0 GHz or higher) (3.0 GHz or higher for using the VA-SW3050Lite)• Memory: 512MB or more (1 GB or more for using the VA-SW3050)• Network interface: 10Base-T/100Base-TX (RJ-45 connector)• Graphics processor: nVIDIA: GeForce 6000 series or higherATI: RADEON X1000 series or higher• Display card: 1024 x 768 pixels or higher, 16 million colors or higher• Web browser: Internet Explorer Ver.6.0 or higherConnect the camera to the LAN through a switching hub using shielded LAN cables.● Do not use the power supply of the camera.● Do not supply power to the PoE hub or PoE power adapter until the camera installationis finished.MEMO: You may extend the transmission distance by using multiple switching hubs with PoE support.For details on the extendable distance, please refer to the hub performance in thespecifications, etc.Switching hubVideo output(BNC connector)TV monitorWhen directly connectingthe camera to a PC, usethe LAN cable (crosstype).When using the IE/VA-SW3050Lite/VA-SW3050 client version:You need a PC for theVA-SW3050 server version.When using the IE/VA-SW3050Lite/VA-SW3050 server version:You need the VA-SW3050client version to view live/replayed video, because theVA-SW3050 server version isused for recording purposeonly.PC PCLAN cable(CAT5 or higher, straight type)Max. 100 m/109 ydsLAN cable(CAT5 or higher, straight type)Max. 100 m/109 yds