Sanyo VDC-C1574VA - CCTV Camera Instruction Manual

Also see for VDC-C1574VA - CCTV Camera: Specifications Specifications

Contents

Sanyo VDC-C1574VA - CCTV Camera Instruction Manual Manual pdf 1 page image

INSTRUCTION MANUAL(Warranty attached)COLOR CCD CameraAbout this manualBefore installing and using the camera, please read this manualcarefully. Be sure to keep it handy for later reference.This instruction manual covers the following models. Any differenceamong the three models is indicated when necessary.VDC-C1574VAVDC-D1584VAVDC-W1594VADimensions: mm (inches)Safety GuardThis installation should be made by a qualified service person and shouldconform to all local codes.Depending on the conditions of use, installation and environment,please be sure to make the appropriate settings and adjustments. Ifyou need help with installation and/or settings, please consult yourdealer or an Authorized Sanyo Service Center.140.2 (5.5)46.2 (1.8)30.0 (1.2)91.5 (3.6)INFORMATION TO USERTHIS SYMBOL INDICATES THAT THERE ARE IMPORTANTOPERATING AND MAINTENANCE INSTRUCTIONS IN THELITERATURE ACCOMPANYING THIS UNIT.WARNING:TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.For the customers in CanadaThis Class B digital apparatus complies with Canadian ICES-003.Pour la clientèle canadienneCet appareil numerique de la Classe B est conforme a la norme NMB-003du Canada.This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, andcan radiate radio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Changes or modifications not expressly approved by Sanyo may void the user'sauthority to operate this camera.■ In case of a problemDo not use the unit if smoke or a strange odor comes from the unit,or if it seems not to function correctly. Turn off the powerimmediately and disconnect the power cord, and then consult yourdealer or an Authorized Sanyo Service Center.■ Do not open or modifyDo not open the cabinet, as it may be dangerous and causedamage to the unit. For repairs, consult your dealer or anAuthorized Sanyo Service Center.■ Do not put objects inside the unitMake sure that no metal objects or flammable substance get insidethe unit. If used with a foreign object inside, it could cause a fire, ashort-circuit or damage. Be careful to protect the unit from rain, seawater, etc. If water or liquid gets inside the unit, turn off the powerimmediately and disconnect the power cord, and then consult yourdealer or an Authorized Sanyo Service Center.■ Be careful when handling the unitTo prevent damage, do not drop the unit or subject it to strongshock or vibration.■ Do not install this unit close to magnetic fieldsThe magnetic fields may result in unstable operation.■ Protect from humidity and dustTo prevent damage, do not install the unit where there is greasysmoke or steam, where the humidity may get too high, or wherethere is a lot of dust.■ Protect from high temperaturesDo not install close to stoves, or other heat sources, such asspotlights, etc., or where it could be subject to direct sunlight, as thiscould cause deformation, discoloration or other damage.Be careful when installing close to the ceiling, in a kitchen or boilerroom, as the temperature may rise to high levels.■ CleaningDirt can be removed from the cabinet by wiping it with a soft cloth.To remove stains, wipe with a soft cloth moistened with a softdetergent solution and wrung dry, then dry by wiping with a softcloth.Do not use benzine, thinner or other chemical products on thecabinet, as this may cause deformation and paint peeling. Beforeusing a chemical cloth, make sure to read all accompanyinginstructions. Make sure that no plastic or rubber material comesinto contact with the cabinet for a long period of time, as this maycause damage or paint peeling.■ Approvals: IP66This unit has been certified to IP66 standards when properlyinstalled.Ensure all openings in enclosure are sealed as per manufacturer'sinstructions.The IP66 has not been verified by UL.L5BN2/US, US2, US3 (1106KP-CP-a)PRECAUTIONSSANYO Electric Co., Ltd.Printed in KoreaBefore sending the camera out for repair, check the items below.If the problem persists after checking these items, consult yourdealer or an Authorized Sanyo Service Center.■ If no image appearsIs the coaxial cable attached securely?Are the power and voltage normal?Has the iris of the lens been adjusted correctly (with the levelvolume)?Is there adequate illumination?■ If the image is unclearIs the monitor adjusted correctly?Is the lens in focus?Is the lens clean?Dirt or fingerprints on the lens can adversely affect the image.Gently wipe any dirt or fingerprints off the lens with a soft cloth orlens cleaning paper and cleaning fluid (commercially available).The camera is a precision instrument. Handle it carefully andalways follow the safety precautions. If the camera requires service,never try to repair it yourself or open the casing.For servicing, maintenance, or repairs, consult your dealer or anAuthorized Sanyo Service Center.The factory setting value is represented in bold.Appearance and specifications are subject to change without prior notice.TROUBLESHOOTINGSERVICESPECIFICATIONSVDC-C1574VA VDC-D1584VA VDC-W1594VAScanning system NTSC standard 525 lines, 60 fields/sec.Image sensor 1/3" interline transfer method CCDNumber of effectivepixels 768 (H) x 494 (V)Horizontal resolution More than 520 TV lines More than480 TV linesMinimum illumination(approx.) 1.0 lx (F1.4)0.05 lx(F1.4, B/W mode)1.0 lx(F1.4, color mode)1.0 lx (F1.4)Video output 1.0 V(p-p) / 75 Ω, composite, BNCVideo S/N ratio More than 50 dB (AGC off)Lens Built-in vari-focal auto-iris, f = 2.6 - 6 mm, F = 1.4 - 2.0Pan/Tilt adjustment Pan: ±180º, Tilt: ±60º (Ceiling Installed)Backlight compensation OFF / ON (Center zone metering) –Iris setting AI / EI (Only AI is available for the built-in lens)White balance ATW / ATW-A ATW / ATW-AGain control ON / OFFWide dynamic range – – ON / OFFDynamic range – – 54 dB typicalSync system DC 12 V user: Internal sync, AC 24 V user: Line-lockDay/Night function – Always active –Operating environment Temperature: -10 - +50°C (14 - 122°F) -10 - +40°C(14 - 104°F)Humidity: less than 90% RH (no condensation)Power supply 24 V AC ±10%, 60 Hz/12 - 15 V DCPower consumption(approx.) 2.6 W 2.6 W 4.0 WWeight (approx.) 850 g (30 oz)AccessoriesHexagonal wrench, Large, Medium and Small ....... each1Rubber cushion............................................................... 1Mounting screw............................................................... 4Screw hold ...................................................................... 4Mounting template .......................................................... 1Since the conduit hole cover is not waterproof-finished, always be sure toseal the cover entirely by caulking, for example, upon completion ofinstallation.Make sure to perform waterproofing properly to the ceiling or wall whereyou are installing the unit.When setting up this camera, make sure that it is installed securely.Check that the installation location is strong enough to bear the cameraweight before proceeding. Install on a ceiling or wall that has no surfaceunevenness. In addition, do not touch the camera unit except whensettings and adjustments are necessary.■ When routing the cables on ceiling or wall surfaces:Loosen the conduit hole cover fixing screw (A) on the back of the cameraunit base with the hexagonal wrench (medium), open the cover (B), andpass the connection cables through the conduit hole.1 Loosen the four fixing screws (C) using the supplied hexagonalwrench (large) and remove the dome cover (D).2 Make screw holes and a cable hole in the rubber cushion (E).3 Attach the rubber cushion to the back of the camera unit (F).4 Place the supplied "Mounting template" (G) on the mountingsurface, and mark four positions shown in (G).5 Drill holes at the positions as marked and insert the suppliedscrew holds (H) in the holes.6 Cut a hole in the ceiling or the wall for routing the cables.7 Pass the power cable (I) and video cable (J) from the camera unitthrough the cable hole in the ceiling or the wall.8 Align the unit mounting holes of the camera unit with the holes inthe ceiling or the wall.9 Secure with the supplied mounting screws (K).10 Carry out the settings and adjustments for the camera. Refer to“CONNECTIONS AND SETTINGS” for camera settings and lensadjustments.11 If a whole surface of the lens does not show through the camerawindow (L), loosen the screws (M) and adjust the dome liner (N).And then secure the dome cover by tightening the fixing screws(C) with the hexagonal wrench (large).INSTALLATION88.088.082.546.0(A)(B)(C)(D)(E)(F)(G)(H)(H)(I)(J)(K)(L)(M)(N)Drop-prevention cordVDC-C1574VAVDC-D1584VAVDC-W1594VAEspañolEnglish Français

/ 2

Related manuals for Sanyo VDC-C1574VA - CCTV Camera