English 22TURNING THE CAMERA ON AND OFFTurning on the camera1 Set the main switch.To shoot pictures:Set to RECTo play back images:Set to PLAY2 Open the monitor unit.3 Press the ON/OFF button for about 1second.h The camera turns on, and an imageappears on the LCD monitor.Turning on the camera when the power save (sleep) function is activeIn order to preserve battery pack power, the power save (sleep) functionwill automatically turn off the camera after one minute of no use duringshooting, or five minutes of no use during playback (factory-presetsetting).i When the power save function is active, you can restore the power by anyof the following methods:h Move the main switch.h Press the ON/OFF button.h Press the Still image shooting/Video clip recording button.h Press the SET or MENU button.h Press the zoom switch.i After the power save function has been active for about 1 hour, the camerawill switch to the standby mode. In this case, you can restore the power bypressing the ON/OFF button, or by closing and then opening the monitor unit.i When the AC adaptor is connected, the power save function will becomeactive about 10 minutes after the camera is turned on (factory-presetsetting).i The user can specify the time elapsed before the power save function isactivated (page 118).i When the camera is connected to a computer or printer using thededicated USB interface cable, the power save function is disabled, andthe camera turns off after about 12 hours.Main switchMonitor unitLCD monitorON/OFF button
