29 EnglishBEFORE TAKING PICTURESHints for taking picturesMuting the operation soundsi The operation sounds that are generated, for example, when the still imageshooting button, MENU button or SET button is pressed, as well as theaudio guidance when you switch the mode, can be muted (page 106).Where is the image and audio data saved?i All the image and sound data is recorded on the card installed in thecamera.Taking pictures in backlight conditions...i When taking pictures with the light coming from behind the subject, due tothe characteristics of the lens, light lines or ghost patterns (flarephenomenon) may appear in the captured image. In this situation, it isrecommended that you avoid taking pictures with the subject lit frombehind.While the image data is being recorded...i While the multi-indicator is flashing red, the image data is being written tothe memory, during which time it is not possible to capture another image.Another image can be captured after the flashing red indicator turns off.However, even when the multi-indicator is flashing red, depending on thecamera’s internal memory remaining capacity, in some cases the nextimage can be captured about 2 seconds after shooting.Checking the last image shot (instant review)i After shooting a picture, you can immediately view it by pressing the SETbutton once.i During instant review of a video clip, normal play, reverse play and pauseare available (page 42).i If you wish to delete the image (for a video clip, it must be in the pause orstop mode), toggle the SET button up to access the delete function.i You can view other images while the instant review display is showing bytoggling the SET button to the left or right.i Cancel the instant review display (for a video clip, it must be in the stopmode) by toggling the SET button down.
