Sanyo VPC-CG10BK Service Manual

Contents

- 17 -3. ELECTRICAL ADJUSTMENT3-1. Table for Servicing ToolsDownload the calibration software and the firmwarefrom the following URL.http://www.digital-sanyo.com/overseas/service/Place the DscCalDi.exe file, camapi32.dll file andQrCodeInfo.dll file together into a folder of yourchoice.3-2. Equipment1. PC (IBM®-compatible PC, Windows 2000 or XP or Vista)3-3. Adjustment Items and Order1. Lens Adjustment (Infinity)2. Lens Adjustment (1m)3. AWB Adjustment4. CCD White Point Defect Detect Adjustment5. CCD Black Point And White Point Defect Detect Adjust-ment In LightedNote: If the lens, CCD and board and changing the part, it isnecessary to adjust again. Item 1-5 adjustments should becarried out in sequence.3-4. Setup1. System requirementsWindows 2000 or XP or VistaIBM® -compatible PC with pentium processorUSB port40 MB RAMHard disk drive with at least 15 MB availableVGA or SVGA monitor with at least 256-color display2. Pattern boxTurn on the switch and wait for 30 minutes for aging to takeplace before using Color Pure. It is used after adjusting thechroma meter (VJ8-0192) adjust color temperature to 3100± 20 K and luminosity to 900 ± 20 cd/m 2 . Be careful of han-dling the lump and its circumference are high temperatureduring use and after power off for a while.3. Computer screen during adjustment3-5. Connecting the camera to the computerThis camera requires a DC adaptor (sold separately) in or-der to use an AC adaptor.1. Insert the DC adaptor to the camera.2. Insert the AC adaptor’s cable to DC terminal of the DCadaptor.3. Line up the arrow on the cable connector with the notch onthe camera's USB port. Insert the connector.4. Locate a USB port on your computer.5. If “USB CONNECTION” is displayed, choose the “COMPUTER”, and press the SET button.Next, choose the “CARD READER”, and press the SETbutton.Ref. No. Name Part codeJ-1J-2J-3J-4J-5J-6J-7J-8VJ8-0190VJ8-0192VJ8-0191VJ8-0188VJ8-0260VJ8-0282Pattern boxCalibration softwareChroma meterSpare lump (pattern box)Discharge jigCollimatorSpare lump (collimator)Siemens star chartNumber11111111J-1 J-3J-4 J-5J-8FirmwareDataAWBFocusUV MatrixR BrightRGB OffsetTintB BrightGainPhaseLCDCalibration UploadPAF Cal.LCD Type H AFC TestVCOMDCVCOMPPCal DataCal ModeOKOKEVFUSB storageGetSetVID SetPID SetSerial SetRev. SetSettingLanguageVideo ModeVCOFactory CodeHall Cal.Backrush pulse : SetGet