– 15 –3. ELECTRICAL ADJUSTMENT3-1. Table for Servicing ToolsNote: J-1 Pattern box (color viewer) is 100 - 110 VAC only.3-2. Equipment1. Oscilloscope2. Digital voltmeter3. AC adaptor4. PC (IBM R -compatible PC, Pentium processor, Window98 or Me or 2000 or XP)3-3. Adjustment Items and Order1. IC501 Oscillation Frequency Adjustment2. Lens Adjustment3. AWB Adjustment4. CCD White Point Defect Detect Adjustment5. CCD Black Point And White Point Defect Detect Adjust-ment In LightedNote: Item 2-5 adjustments should be carried out in sequence.3-4. Setup1. System requirementsWindows 98 or Me or 2000 or XPIBM R -compatible PC with pentium processorCD-ROM drive3.5-inch high-density diskette driveUSB port40 MB RAMHard disk drive with at least 15 MB availableVGA or SVGA monitor with at least 256-color display2. Installing calibration software1. Insert the calibration software installation diskette into yourdiskette drive.2. Open the explorer.3. Copy the DscCalDI_150 folder on the floppy disk in the FDdrive to a folder on the hard disk.3. Installing USB driverInstall the USB driver with camera or connection kit for PC.4. Pattern box (color viewer)Turn on the switch and wait for 30 minutes for aging to takeplace before using Color Pure. It is used after adjusting thechroma meter (VJ8-0192) adjust color temperature to 3100 ±20 K and luminosity to 900 ± 20 cd/m2. Be careful of handlingthe lump and its circumference are high temperature duringuse and after power off for a while.5. Computer screen during adjustment3-5. Connecting the camera to the computer1. Line up the arrow on the cable connector with the notch onthe camera's USB port. Insert the connector.2. Locate a USB port on your computer.3. Insert the AC adaptor’s cable to DC jack.4. If “USB CONNECTION” is displayed, choose the “CARDREADER”, and press the SET button.Ref. No. Name Part codeJ-1J-2J-3VJ8-0190VJ8-0263Pattern box (color viewer)Calibration softwareJ-4Number111Chroma meter VJ8-01921Spare lump VJ8-0191J-5J-1 J-2J-3 J-4J-51Discharge jig VJ8-0188J-6 1Collimator VJ8-0260FirmwareDataAWBFocusUV MatrixRGB OddRGB GainTintRGB EvenVCOMDCPhaseLCDCalibration UploadPAF Cal.LCD Type H AFC TestVCOMPP(LOW)VCOMPP(HI)Cal DataCal ModeOKOKEVFUSB storageGetSetVID SetPID SetSerial SetRev. SetSettingLanguageVideo ModeVCOFactory CodeBackrush pulse : SetGet