English 32Hints for taking picturesMuting the operation soundsi The operation sounds that are generated, for example, when the shutterbutton, MENU button or SET button is pressed, as well as the audioguidance when you switch the mode, can be muted (page 119).Where is the image and audio data saved?i All the image and sound data is recorded in the camera’s internal memoryor on the card installed in the camera.i When a card is installed in the camera, the data is recorded on the card. Ifno card is installed, the data is recorded in the camera’s internal memory.Taking pictures in backlight conditions...i When taking pictures with the light coming from behind the subject, due tothe characteristics of the CCD, light lines or ghost patterns (flarephenomenon) may appear in the captured image. In this situation, it isrecommended that you avoid taking pictures with the subject lit frombehind.While the image data is being recorded...i While the multi-indicator is flashing red quickly, the image data is beingwritten to the memory, during which time it is not possible to captureanother image. Another image can be captured after the flashing redindicator turns off. However, even when the multi-indicator is flashing red,depending on the camera’s internal memory remaining capacity, in somecases the next image can be captured about 2 seconds after shooting.Downloaded From camera-usermanual.com Sanyo Manuals