41 EnglishVIDEO CLIP RECORDING AND PLAYBACKHINTAdjusting the LCD monitor brightnessi While the Shooting Screen is active, you can quickly access the screen foradjusting the brightness of the LCD monitor by pressing the MENU buttonfor at least 1 second.Display the video clip playback pointi During video clip playback, press the MENU button for at least 1 second todisplay a bar showing the current playback point in the video clip.i Press the MENU button for about 1 second to cancel the bar.CAUTIONIf no audio is heard...i The audio is not played back when the video clip is played back in theframe-by-frame playback or reverse playback mode.During video clip playback, the sound of a motor is audiblei During recording, the sound of the optical zoom movement or autofocusmovement was recorded. This is not a malfunction.The data for a video clip is very large.i Therefore, be aware that if the video clip is uploaded to a computer to beplayed back, the computer may not be able to play back the video fastenough, making it appear jerky. (The video will always be displayedproperly on the LCD monitor or a television.)When the remaining card memory becomes 10 percent or less of thetotal card capacity...i The remaining memory icon appears on the LCD monitor.i Depending on the card, shooting may end even before the possibleshooting time indicated.Downloaded From camera-usermanual.com Sanyo Manuals
