15 EnglishFor MAC OS 9.xx usersMounting your camera1 Set the camera to the card reader mode (page 11).h The camera is recognized as a drive and appears as an icon named[XACTI HD1A] on the Desktop.h Double-click on the [XACTI HD1A] icon, and you can process thecontents of the card installed in your camera exactly like you would thedata in the other computer drives.Dismounting the cameraCAUTIONi To disconnect your camera, be sure to follow the procedure below. Failureto follow this procedure may cause faulty operation of your computer orloss of card data.1 Drag the [XACTI HD1A] icon for your camera on the Desktop to thetrashcan.h The [XACTI HD1A] icon disappears from the Desktop.h You can now disconnect your camera.For MAC OS X usersUse the same mounting and dismounting procedure as for the MAC OS9.xx. However, if an application which automatically recognizes cameraimages is installed, it will be activated.CAUTIONWhen using in a Mac OS X Classic environmenti It is not possible to save or load data directly to or from the card installed inthe camera. The data must first be saved once to your hard disk.Downloaded From VideoCamera-Manual.com Manuals
