31 EnglishTURNING THE CAMERA ON AND OFFTurning on the camera when the power save (sleep) function is activeIn order to preserve battery pack power, the power save (sleep) functionwill automatically turn off the camera after one minute of no use duringshooting, or five minutes of no use during playback (factory-presetsetting).i When the power save function is active, you can restore the power by anyof the following methods:h Move the main switch.h Press the ON/OFF button.h Press the still image shooting/video clip recording button.h Press the SET or MENU button.h Press the zoom switch.h Press the flash button [?].h Press the HD/NORM button.h Press the sequential/single button [O/ ].i After the power save function has been active for about 1 hour, the camerawill switch to the standby mode. In this case, you can restore the power bypressing the ON/OFF button, or by closing and then opening the monitor unit.i When the AC adaptor is connected, the power save function will becomeactive about 10 minutes after the camera is turned on (factory-presetsetting).i The user can specify the time elapsed before the power save function isactivated (page 139).i When the camera is connected to a computer or printer, the power savefunction becomes active after about 12 hours.Turning off the camera1 Press the ON/OFF button for at least 1 second.h The camera turns off.Downloaded From VideoCamera-Manual.com Manuals
