Sanyo VPC-S1080 Instruction Manual

EN-38TroubleshootingRefer to the symptoms and solutions listed below before sending the camera forrepairs. If the problem persists, contact your local reseller or service center.Symptom Cause Solutions / CorrectiveActionsThe power does notcome on.The batteries are not loaded. Load the batteries correctly.The batteries are exhausted. Replace with a new set ofbatteries.The batteries orcamera feels warm.Long period of continuous useof the camera or the flash.Even if press theshutter button, thecamera does notshoot.The shutter button is notpressed all the way down.Press the shutter button all theway down.The internal memory ormemory card does not haveany free capacity.Insert a new memory card, ordelete unwanted files.The status LED blinks. Wait until the status LED stopsblinking.The memory card iswrite-protected.Remove the write-protection.Although it is set toauto focus, it doesnot focus.The lens is dirty. Wipe clean with a soft, dry clothor lens paper.The distance to the subject issmaller than the effective range.Get your subject within theeffective focus range.Files cannot bedeleted.The file is protected. Cancel protection.The memory card iswrite-protected.Remove the write-protection.Cannot downloadimages.The free space on the harddisk in your computer may beinsufficient.Check whether the hard disk hasa space for running Windows,and if the drive for loading imagefiles has a capacity at least thatof the memory card inserted inthe camera.No power supply. Replace with a new set ofbatteries.

/ 42

Related manuals for Sanyo VPC S1080 - Xacti Digital Camera