Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

Also see for VPC S6 - Xacti Digital Camera: Instruction manual User manual

Contents

EN-31Setting FocusImages can be captured with the focus determined automatically using auto focus. You may over-ride theauto focus and specify [ ] macro or [ ] infinity.1. Rotate the mode dial to , , , , , or .2. Press the power switch to turn on the power.3. Press the four-way controller (X/ ). The focus modechanges each time the button is pressed. You can alsochange the setting using four-way controller (ST).4. Press the button to confirm the setting.5. Compose your scene and press the shutter release button.The camera has three focus modes: Standard, Macro and Infinity.The table below will help you choose the appropriate focus mode:Focus mode DescriptionStandard Select Standard-focus setting for most occasions when you want the camera toautomatically determine the focus setting.When using Standard-focus setting, anyobject at a focus range of 40 cm (15.7") or greater can be in focus.Macro Select Macro-focus setting to capture close-up images. When the lens is zoomed toits widest position you may focus objects as close as 6 cm (2.4"). When the lens iszoomed to its telephoto position (3x zoom) you may focus objects as close as 35 cm(13.8").Infinity Select Infinity-focus setting when you want to capture images of subject at adistance of infinity. The flash mode will be set to Flash Off automatically.FocuocusStandaStandardOK :OK :FocusStandardOK :