Sanyo VPC S6 - Xacti Digital Camera Instruction Manual

Also see for VPC S6 - Xacti Digital Camera: Instruction manual User manual

Contents

EN-69CONNECTING TO A PICTBRIDGE-COMPATIBLEPRINTEREven if you do not have a computer, you can connect the camera directly to a printer that supportsPictBridge to perform image selection and printing using the camera screen and controls. DPOF supportalso lets you specify which images you want to print and how many copies of each should be printed.Connecting the camera to the printer1. Rotate the mode dial to and turn your camera on by pressing the power switch.2. Press the four-way controller (X) to select the [Set-up2] menu, then use the four-way controller (T) toselect [USB Mode]. Press the button.3. Use the four-way controller (ST) to select [PictBridge], then press the button.4. Connect your camera and the printer via a supplied USB cable. The message “One moment” will appear on the LCD monitor screen.Printing imagesWhen the camera is properly connected to a PictBridge-compatible printer, the [Printing Mode Select]screen is displayed on the LCD monitor screen. Use the four-way controller (ST) to select the printmode. In [Print] Mode: Lets you print the specified image with PictBridge.Step Figure Procedure1Use the four-way controller (ST) to select the [Print] mode, then press thebutton.Printing Mode SelectPrinting Mode SelectPrinting Mode SelectOK :OK :OK :PrintPrintPrintPrint AllPrint AllPrintPrint With DPOith DPOFPrint AllPrint With DPOF

/ 73

Related manuals for Sanyo VPC S6 - Xacti Digital Camera