Sanyo VPC-S60 Service Manual

Also see for Xacti VPC-S60: Instruction manual Quick guides Brochure

Contents

– 20 –3-8. Factory Code Setting1. Check the "Factory Code" display within the Setting group.2. For U.S.A., Canada and NTSC general areaIf "FC_SANYO_U" does not appear, click on the " " marklocated on the right of the "Factory Code" display BOX andselect "FC_SANYO_U".3. For Europe and PAL general areaIf "FC_SANYO_EX" does not appear, click on the " " marklocated on the right of the "Factory Code" display BOX andselect "FC_SANYO_EX".3-9. Language Setting1. Click on the " " mark located on the right of the"Language" display BOX.2. Select language. (Default is English.)3. End "DscCal" and remove the camera before turning thecamera power OFF.FirmwareDataAWBFocusUV MatrixR BrightRGB OffsetTintB BrightGainPhaseLCDCalibration UploadPAF Cal.LCD Type H AFC TestVCOMDCVCOMPPCal DataCal ModeOKOKEVFUSB storageGetSetVID SetPID SetSerial SetRev. SetSettingLanguageVideo ModeVCOFactory CodeHall Cal.Backrush pulse : SetGet3-10. Program data writing to NAND-MemoryCarry out program data writing to NAND-memoryafter replacing CP1 board.Preparation:SD card: SD card with data written into the root directoryData: S81RNxxx.bin (xxx: version)Overwriting method:1. Insert the above SD card.2. Turn on the camera.3. Press the PLAYBACK button.4. Press the MENU button. The playback menu appears.5. Press the down arrow button. The option menu appears.6. Press the left arrow button for 2 seconds.FIRMWARE UPDATE will display.7. Choose YES.8. Press the SET button. Update is starting.Note:Do not turn off the camera’s power or remove the SD cardwhile the firmware is being updated.3-11. Reset SettingCarry out reset settings after replacing CP1 board.1. Turn on the camera.2. Press the MENU button.3. Choose the OPTION.4. Choose the RESET SETTINGS, and press the SETbutton.5. Select Yes, and press the SET button.