Sanyo WXU700 - WXGA LCD Projector Owner's Manual

Also see for PLC-WXU700A: Owner's manual Owner's manual Quick reference guide Owner's manual Service manual

Contents

Sanyo WXU700 - WXGA LCD Projector Owner's Manual Manual pdf 11 page image

11Formatting the USB thumb driveA new USB thumb drive or a USB thumb drive formatted by computer or camera must be formatted bythis product. Memory Viewer function may not operate properly with a USB thumb drive formatted byother equipment.1. In the memory viewer mode, press AUTO SET/CANCEL button. The browser window appears on thescreen.2. Press AUTO SET/CANCEL button again. The cursor moves to menu item.3. Select "Format" from "Menu" with the point buttons and press SELECT button. The formatconfirmation window appears.4. Select "Yes" with the point buttons and press SELECT button to start formatting. It takes about 1-2seconds to complete the formatting.Note:✐ During formatting the USB thumb drive, do not turn off the power or eject the USB thumb drivebecause the data in the USB thumb drive might get damaged. During formatting, the USB thumbdrive is blinking.* The data converted by the Network Viewer 5 [File Converter1] can be stored into the USB thumb drivemounted on the projector directly. For further information, refer to chapter Network Viewer function,"Setting of output destination and conversion mode" (p.117) described on the separated NetworkOwner's manual for Windows.* The program file created by the Program Editor can be stored into the USB thumb drive mounted onthe projector directly. For further information, refer to chapter Network Viewer function, "Creating aprogram file" (p.119) described on the separated Network Owner's manual for Windows.

/ 12

Related manuals for Sanyo PLC-WXU700A