Sanyo WXU700 - WXGA LCD Projector Owner's Manual

Also see for PLC-WXU700A: Owner's manual Owner's manual Quick reference guide Owner's manual Service manual

Contents

Sanyo WXU700 - WXGA LCD Projector Owner's Manual Manual pdf 3 page image

Inserting the USB thumb driveUSB thumb driveInsert the USB thumb drive into the USB port on the rear terminal of the projector as shown in thefigure below.USB port (Series A)CAUTION on insertion and removal of the USB thumb drivePlease note following points to insert and remove the USB thumb drive.- The indicator of the USB thumb drive will be blinking when it is inserted to the projector or while theprojector is reading out the data. Do not remove the USB thumb drive while it is blinking.- When using a USB thumb drive without indicator, you cannot recognize when the projector readingout the data. Please remove it from the projector after closing the memory viewer function or turningoff the projector.- Do not install and remove the USB thumb drive frequently. Remove the USB thumb drive at least 5seconds after installation. And install at least 5 seconds after removal. While installing or removing theUSB thumb drive, the projector is in switching period for those operation.Note:When inserting, confirm the directionof the plug not to damage the terminal.USB thumb drive for the Memory Viewer functionCommercially available USB thumb drives or the supplied one for Auto Capture with this projector canbe used for this Memory Viewer function.The USB port is compatible with USB thumb drive formatted with FAT16 or FAT32.It is not compatible with other formats. Please note that when you format the USB thumb drive.CAUTION on Handling and Storing the USB thumb drive- Do not put USB thumb drive or its cap within close reach of children. Swallowing them maycause suffocation.- If the smoke or questionable odor rise, turn off the peripheral equipment and contact yourdealer.- Do not put water, chemical or oil to the USB thumb drive. It may cause short out or fire.- Do not put foreign objects or put metal objects to the USB terminal. Static electricity may causedata loss or data corruption.- Do not remove the USB thumb drive from the computer or the projector while the USB thumbdrive is reading out or writing the data. It may cause data loss or data corruption.- Do not store the USB thumb drive where high temperature, humid or dusty place or magnetizeditems are around.