English 38Turning on the camera when the power save(sleep) function is activeIn order to preserve battery pack power, the power save (sleep) function willautomatically turn off the camera after one minute of no use during shooting, orfive minutes of no use during playback (factory-preset setting).e When the power save function is active, you can restore the power by any ofthe following methods:Move the main switch.Press the ON/OFF button.Press the MENU button.Press the SET button.e After the power save function has been active for about 1 hour, the camerawill switch to the standby mode. In this case, you can restore the power bypressing the ON/OFF button, or by closing and then opening the monitorunit.e When the AC adapter/charger is connected, the power save function willbecome active about 10 minutes after the camera is turned on (factory-preset setting).e When the camera is connected to a computer or printer, it does not changeto the power save mode. In this case, the power save function becomesactive after about 12 hours.e The user can specify the time elapsed before the power save function isactivated (page 119).e When the camera is connected to a computer or printer, it does not changeto the power save mode. In this case, the power save function becomesactive after about 12 hours.
