137 EnglishCHECKING THE REMAINING CARD MEMORYYou can check how many images can be captured and how much recordingtime is available on the card. For a table showing the maximum number ofimages and recording time for specific cards, please see “Possible No. ofImages/Possible Shooting Time/Possible Recording Time” on page 183.Checking the remaining number of images and video recording time1 Set the main switch to REC, andturn on the camera (page 40).h The remaining number of imagesappears in the upper left of the LCDmonitor.h The remaining video recording timeappears in the upper right of theLCD monitor.h The remaining number of imagesand video recording time will differdepending on the resolution andcompression settings.h When the remaining number ofimages or the remaining videorecording time is “0”, you cannot capture any more images. To capturemore images, either install a new card, or save the images to acomputer and then erase them (page 94) from the card.h When the remaining number of images or the remaining videorecording time is “0”, it may be possible to capture a few more imagesby setting a lower resolution setting (pages 67 and 68), or selecting adifferent image quality setting.12 00 : 00 : 15Remaining number of imagesRemaining videorecording time