143 EnglishCONNECTING TO OTHER EQUIPMENTConnecting to a computer or printerUse the supplied USB interface cable to connect the DIGITAL/AVterminal of the docking station to the USB terminal of a computer orprinter.i Connect the dedicated USB interface cable to your computer’s USBconnector. Do not connect it to the USB port on your monitor or keyboard,or to the USB hub. Be especially careful when installing the driversoftware. In some instances, it may not be possible to correctly install thedriver software.i Please refer to the included SANYO Software Pack instruction manual forinformation regarding operating your camera from a computer.Connecting to a TVUse the supplied S-AV interface cable to connect the docking station tothe TV.i When the camera’s monitor unit is closed and the camera is set in thedocking station, press the CAMERA/CHARGE button on the dockingstation to light the CAMERA indicator.i The remote control unit can be used for playback (page 145).i The same playback procedure as when playing back with the camera isused to play back audio recordings as well.To AC adaptor/chargerTo USB connector on thecomputer or printerDIGITAL/AV terminalSupplied USB interface cableThe [n] mark on the plug is facing down.