English 160CONNECTING TO A PRINTERHINTTo cancel printing1 During printing, toggle the SET button down.h The confirmation screen to cancel printing appears.2 Select “CANCEL” and press the SET button.h If “EXIT” is selected and the SET button is pressed, printing resumes.About printing all the imagesi Printing is not possible if there are more than 999 images in the memory.i Delete unwanted images before printing.About DPOF printingi DPOF printing is not possible if your printer is not DPOF-compatible.About the printer settingsi The printer setting parameters shown on the Printer Settings Screen willdiffer depending on the printer that is connected.i To use printer values that do not appear on your camera’s Printer SettingsScreen, select “Y”.i If a function set by the camera is not available in the printer, the camera’sprinter setting will automatically change to “Y”.CAUTIONInsert and pull out the cable carefullyi When connecting the cables, make sure that the cable plugs are correctlyoriented and that they match the shapes of the terminal sockets on thedevices. Push the plugs in straight when connecting them. If undue force isused to connect a cable, it may permanently damage the connector pins inthe terminal socket.i Do not use excessive force when connecting and disconnecting cables.Caution when connecting a printeri If the power to the printer is turned off while it is connected, the cameramay not operate correctly. If the camera does not operate correctly,disconnect the USB interface cable, turn off the camera, and thenreconnect the cable.i During PictBridge printing, the camera’s button operation response isslower.i If the camera is powered by the battery pack for printing, make sure thatthe remaining battery charge is sufficient.
