161 EnglishOTHER CONNECTIONSSCREEN CAPTUREIndividual windows on your computer’s monitor display can be saved in thecamera.1 Set the camera to the SCREEN CAPTURE mode (page 142).2 Run Screen Capture.h Screen Capture is automatically launched when you start yourcomputer.h Right-click on [Xacti Screen Capture 1.1] in the task tray, and then left-click on [Exit]. When the screen to confirm appears, left-click on [Yes].h To launch Screen Capture again, click [Start]→[Programs]→[XactiScreen Capture 1.1].3 On the computer’s monitor, display the window you wish to save.h Make the window you wish to save the active (selected) window.4 Press the [ ] button.h The currently displayed active window is saved as a JPEG file in thecamera’s memory.h When there is no active window, the entire screen display is saved.h The saved file is stored in the \DCIM\***SANYO folder in the drive forthe camera.h To exit Screen Capture, quit the application.HINTi To use Screen Capture, only one camera should be connected to thecomputer.i The maximum file size that can be saved for any one screen capture is10 MB.i When running Screen Capture, do not turn off the camera or remove thecard from the camera, as doing so may corrupt the files. Also, do not usethe computer to process the contents of the files in the camera’s card, orthe camera may not operate normally.
