English 22Turning on the camera when the power save (sleep) function is activeIn order to preserve battery pack power, the power save (sleep) functionwill automatically turn off the camera after one minute of no use duringshooting, or five minutes of no use during playback (factory-presetsetting).i When the power save function is active, you can restore the power by anyof the following methods:h Press the playback button [H].h Press the SET or MENU button.h Press the shutter button.h Press the ON/OFF button.i When the AC adaptor is connected, the power save function will becomeactive about 10 minutes after the camera is turned on (factory-presetsetting).i The user can specify the time elapsed before the power save function isactivated (page 128).i When the camera is connected to a computer or printer using thededicated USB interface cable, the power save function is disabled, andthe camera turns off after about 12 hours.HINTIf the K icon appears...i When a picture is taken, the date and time it was captured is recorded withit. When the date and time cannot be recorded with the image because thedate and time have not yet been set (page 23), the K icon appears. Tohave the date and time recorded with images, please make this settingbefore capturing images.
