Sanyo Xacti VPC-S500 Owner's Manual

Also see for VPC-S500 - 5-Megapixel Digital Camera: Manuel d'instructions

Contents

EN-29Setting FocusImages can be captured with the focus determined automatically using auto focus.You may over-ride the auto focus and specify [ ] macro or [ ] infinity.1. Rotate the mode dial to , , , ,, or .2. Press the power switch to turn on thepower.3. Press the four-way controller (X/ ). Thefocus mode changes each time the buttonis pressed. You can also change thesetting using four-way controller (ST).4. Press the button to confirm the setting.5. Compose your scene and press the shutter release button.The camera has three focus modes: Standard, Macro and Infinity.The table below will help you choose the appropriate focus mode:Focus mode DescriptionStandard Select Standard-focus setting for most occasions when you wantthe camera to automatically determine the focus setting.Whenusing Standard-focus setting, any object at a focus range of 40 cm(15.7”) or greater can be in focus.Macro Select Macro-focus setting to capture close-up images. When thelens is zoomed to its widest position you may focus objects asclose as 6 cm (2.4”). When the lens is zoomed to its telephotoposition (3x zoom) you may focus objects as close as 35 cm(13.8”).Infinity Select Infinity-focus setting when you want to capture images ofsubject at a distance of infinity. The flash mode will be set to FlashOff automatically.FocuocusStandaStandardOK :OK :FocusStandardOK :