Sanyo plc-wu3800 Service Manual

Also see for PLC-WU3800: Dimensional drawing Manual Manual Command list Specification sheet

Contents

-20-Optical Parts DisassemblyL3D07X-85G001-B-1234A1-85G00L3D07X-86G001-B-1234A1-86G00G-LCd PanelThere are 2 types of LCD Panel/Prism Ass'y for this model. Either L-Type or R-Type LCD Panel/Prism assy is used onthe projector. Check which type of LCD Panel/Prism assy is used with the figure below.Since both have no compatibility, same type of the LCD panel/prism assy must be used for replacement. If not, it mayhave a serious effect on the optical characteristics.How to check the type of LCd Panel/Prism Ass'yCheck the printed number on the flat cable of the G-LCD Panel.L-type LCd Panel/Prism Ass'y r-type LCd Panel/Prism Ass'yFig.4-2Panel Type CheckIMPOrtANt NOtICe on LCd Panel/Prism Ass'y replacementLCD panels used for this model can not be replaced separately. Do not disassemble the LCD Panel/Prism Ass’y.These LCD panels are installed with precision at the factory. When replacing the LCD panel, should be replacedwhole of the LCD panels and prism ass’y at once.When replacing the LCD Panel/Prism assy,take the optical and electrical adjustments following to the chapter"Adjustment"