-25-Optical AdjustmentsFig.2-2Moving of Slot dCyxWhiteSlot dWhite1 Turn the projector on by a state of without FPC cables.2 Project all of lights on the screen.3 Adjust the adjustment base of integrator lens assy to makecolor uniformity in white.1) If the shading appears on the left or right of the screen asshown in Fig.2-1, loosen 1 screw A , and adjust the slotB to make color uniformity in white by using a slot screw-driver.2) If the shading appears on the top or bottom of the screenas shown in Fig.2-2, loosen 2 screws C, and insert a slotscrewdriver into the slot d and adjust color uniformity inwhite by turning a slot screwdriver up or down.4 Tighten screws A and C to fix the Integrator lens unit.Note:The relay lens adjustment must be carried out after completingthis adjustment.Integrator lens adjustmentabMoving of slot BFig.2-1Slot BAa byx
