§ Fan and Thrust Duct Installation38 Viper Jet MKII CompositeWire and Mount ESC and AttachFan Access Hatch CoverRequired Partsoooo Fuselage [F]oooo Fan Access Hatch Cover [F1]oooo ESC (Electronic Speed Control)Required Tools and Adhesives®®®® Mounting Tape or Equivalent®®®® Packing Tape}}}} Ensure you mount the ESC where it will receiveoptimum cooling. A good location is betweenthe two thrust ducts as negative pressure pullsair between the ducts towards the fan.ESC mounted in position}}}} Feed the ESC wires around the inlet ducts andconnect them to the motor wires.}}}}Tip: this is a good time to run up the motor andverify that it spins in the correct direction. If themotor spins backwards simply swap two of thewires coming from the ESC.}}}} Trim the fan access hatch cover to size usingthe inscribed panel lines. Test fit the fan accesshatch cover; make any necessary adjustmentsat this time.Trim the fan access hatch cover}}}} Complete the power system installation byattaching the fan access hatch cover withpacking tape. This will allow for easy removal iffan maintenance is necessary in the future.Attach the fan access hatch cover with tape
